The OCECO type V-130 conservation regulator is the finest "conventional" vent available. It is constructed primarily of aluminum and is, consequently, ideal for petroleum or hydrocarbon storage applications. This unit provides excellent flow, even at low tank pressure, as shown on the flow chart.

With any type of closed liquid storage vessel, the importance of adequate venting capacity cannot be over-emphasized. Serious structural damage will result to a tank if maximum design pressures are exceeded.

Conservation vent valves were designed to permit atmospheric steel storage tanks to "breath" and to minimize the loss of valuable vapors during periods of pressure and relief.
Since their inception, conservation vent valves have undergone major design and flow capacity improvements.

The flexible synthetic membrane, in addition to providing a positive seal, makes the V-130 virtually non-freezing even under severe climatic conditions. A variety of membranes are available to meet most corrosive applications.

The V-130 comes in 2,3,4,6,10 and 12 inch sizes. The body and valves are cast aluminum, and the hood is spun aluminum. Standard membranes are: Polyblend, Viton and Teflon

Download AutoCad Drawings

OCECO V-130 Vent Valve Request

Model V-130

Size

2 inch 3 inch 4 inch 8 inch 10 inch 12 inch

Membrane

Polyblend Viton Teflon

Setting

Setting betwen 0.5 to 16 oz.

Contact Information

Quantity First Name Last Name E-mail End Use Country Notes